Kit for Car

ALPINE Front+Rear Car Speakers+300W Underseat Sub+Deadening Full Kit for VW T6

ALPINE Front+Rear Car Speakers+300W Underseat Sub+Deadening Full Kit for VW T6

ALPINE Front+Rear Car Speakers+300W Underseat Sub+Deadening Full Kit for VW T6

VW T6 Complete 4 Speaker & Underseat-Bass Sound System. Alpine SPG-17C2 6.5 16.5cm 165mm 480 Watts a Pair 2-Way Coaxial Front Car Speakers &. Alpine SPG-13C2 5.25 13cm 2 Way 400 Watts a Pair Car Van Rear Coaxial Speakers.

Car Fitting Kit & Phoenix Gold 3 00 Watts Underseat Car Subwoofer & Silent Coat Sound Deadening Small Kit. THIS KIT IS DESIGNED TO WORK WITH ALL FACTORY AND AFTERMARKET STEREO. Built to Handle High Power The new Alpine Type-G Series of component and coaxial speakers are designed and built to handle high power levels.

This speaker also delivers good sound quality, due to a soft dome tweeter, square voice coil wire with Kapton bobbin and an audio tuned capacitor. 480 watts peak power (pair). 240 watts peak power (each). Tweeter Type: 20mm Silk Soft Dome Tweeter.

Cone Material: Polypropylene Cone Pearl Mica Injection. Voice Coil Type: Square Voice Coil Wire.

Woofer Mounting Diameter: 14.1 cm. Woofer Mounting Depth: 6.1 cm. Frequency Response: 68 Hz to 20 kHz. Sensitivity: 88.5dB / W (1m). Alpine SPG-13C2 Features & Specifications.

400 watts peak power (pair). 200 watts peak power (each). Woofer Mounting Diameter: 11.0 cm. Woofer Mounting Depth: 4.3 cm. Frequency Response: 82 Hz to 20 kHz.

Sensitivity: 87.5dB / W (1m). The Z8150 subwoofer is designed with maximum yield in a space at a competitive price. There are a few subwoofer boxes which are suitable for any application, for good additional layer to a heavy dual subwoofer box. Ideally suited for expansion directly behind original radio or aftermarket radio. 8 closed flat 300 Watts subwoofer.

Car remotely via Hi-level input. H = 68 mm x W = 250 mm x L = 354 mm. Includes amp kit & bass controller.

Prior to fitting any speakers in the car we would suggest adding sound deadening to the doors, this will help reduce road noise and vibration and dramatically improve the sound of your car audio stereo system. We also as standard practice in our store add noise isolator and sound absorber when fitting speakers. The Noise Isolator is used on the speaker baffle and door panel to create a rattle free airtight seal to the door card and the the Sound Absorber is used to used behind your speakers to absorb soundwaves 30-40% more than on a plain material. This equipment we feel is essential part of upgrading the speakers in your car and would improve the sound, we offer this equipment in this pack and would be ideal to use in your audio upgrade. The Silent Coat 2mm Damping Mat uses mass loading to lower panel resonance and absorb structural vibrations, converting them into low level heat.

Stop those nasty rattles, eliminate road and outside noise and dramatically improve the sound of your car audio stereo system. The Sound Absorber is a polyurethane foam material with a special formulation to achieve superb sound absorption and flexibility. Use behind your speakers to absorb back waves and as a diffuser.

The egg box form on the surface absorbs 30-40% more sound than plain material. The Silent Coat Noise Isolator is a noise and thermal isolation material made using special closed structure foam technology. Use on the speaker baffle and door panel to create a rattle free airtight seal to the door card. Whats Included In The Starter Pack. 2 x Sheets of Silent Coat Deadening (375 x 265 mm each).

1 x Absorber 15 panel (500m x 600mm). 1 x Isolator 4 panel (500mm x 600mm) Silent Coat Deadening. Specifications: 4 x Sheets of Silent Coat Deadening. Special Deep Tension Anti Resonance Top. Sheet size 375 x 265 mm.

Apply over Silent Coat Deadening for best results. Whats Included In This Complete Kit.

1 x Alpine Speakers Front (pair). 1 x Alpine Speakers Rear (pair).

1 x T1-20ACT Underseat Subwoofer. 2 x Speaker Brackets (pairs). 2 x Speaker Wires (pairs). 1 x Silent Coat Starter Pack.

We have found on some vehicles the speaker holes on our supplied brackets do not line up with the factory holes, therefore you might have to drill new holes into our brackets and also the door skin to mount them. To make your sound enjoyment even better we can supply sound deadening to keep road noise out and your music in. Please see item number below to order. You may need some additional wiring for the supplied underseat subwoofer if you want to use a RCA cable from an aftermarket stereo.

You might have to drill new holes into the door skin to make the speaker brackets fit. The item "ALPINE Front+Rear Car Speakers+300W Underseat Sub+Deadening Full Kit for VW T6" is in sale since Friday, May 3, 2019. This item is in the category "Vehicle Parts & Accessories\In-Car Technology, GPS & Security\In-Car Entertainment\Speakers". The seller is "bassjunkies-wton" and is located in wolverhampton.

This item can be shipped to all countries in Europe.
  • Size: 6.5 in
  • Type: Coaxial
  • RMS Power: 300 W
  • Manufacturer Part Number: Does Not Apply
  • Driver: Tweeter
  • Brand: Alpine

ALPINE Front+Rear Car Speakers+300W Underseat Sub+Deadening Full Kit for VW T6