Kit for Car

For Ford Focus Mk2 ST Early Rr Uppr Control Arm Camber Bushes Powerflex Full Kit

For Ford Focus Mk2 ST Early Rr Uppr Control Arm Camber Bushes Powerflex Full Kit

For Ford Focus Mk2 ST Early Rr Uppr Control Arm Camber Bushes Powerflex Full Kit
Fits Ford Focus Mk2 ST (Early Models) Rear Upper Control Arm Camber Adjustable Powerflex Complete Bush Kit. For help identifying the location of the bushes in this kit on your vehicle, please refer to the diagram below. Please Note: We haven't included Bump Stops or Exhaust Rubbers in this kit as many track focused cars already feature modified versions of these items. This Kit contains the following items: Where there is an option (or) please tell us which one you would like us to send out with your kit.

Diagram Ref 1: Front Wishbone Front Bushes 14mm bolt. PFF19-8011 (Quantity 2) Diagram Ref 2: Front Lower Wishbone Rear Bushes. PFF19-1202 (Quantity 2) Diagram Ref 3: Front Anti Roll Bar To Chassis Bushes 22mm. PFF19-1203-22 (Quantity 2) Diagram Ref 4 or : Rear Anti Roll Bar To Chassis Bushes 18mm.

PFR19-1204-18 (Quantity 2) Diagram Ref 4 or : Rear Anti Roll Bar To Chassis Bushes 21mm. PFR19-1204-21 (Quantity 2) Diagram Ref 7: Rear Track Control Arm Outer Bushes. PFR19-807 (Quantity 2) Diagram Ref 8: Rear Track Control Arm Inner Bushes. PFR19-808 (Quantity 2) Diagram Ref 10: Rear Upper Control Arm Camber Adjustable Bushes. PFR19-810G (Quantity 4) Diagram Ref 11: Rear Lower Control Arm Bushes. PFR19-811 (Quantity 4) Diagram Ref 12: Rear Trailing Arm Blade Bushes. PFR19-812 (Quantity 2) Diagram Ref 20: Lower Engine Mount Insert. PFF19-1222 (Quantity 1) Diagram Ref 21: Lower Engine Mount Small Bush. PFF19-1221 (Quantity 1) Diagram Ref 25: Front Upper Right Engine Mount Insert. PFF19-1225 (Quantity 1) Diagram Ref 26: Gearbox Mount Insert.

The kit contains the following Fitment notes which are relevant to the items within it. PFF19-8011 - PFF19-8011BLK is a replacement bush that is 15% stiffer than the original bush. For a camber adjustable version of this bush please use PFF19-8011GBLK. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801.

PFR19-810G - PFF19-810G is an adjustable version of our popular PFR19-810 bush and is designed to provide +/- 1 degrees of on-car camber adjustment. This part replaces OE numbers: 1061659, 1136072, 1329730, 1448127, 1517403, 1M515500AC, 1M515500BA, 31201356, 31212503, 31277305, 6M515500BA, 8671921, 8M515500AA, 8M515500AB, 98AG5500AG, 98AG5500BF, 98AGG5K653DA, BBM228C10, BP4K28C10B. PFR19-812 - PFR19-812 provides stability to the rear trailing arm whilst allowing the knurled pattern bush to freely rotate in the supplied outer shell.

This part replaces OE numbers: 1061670, C2Y6-28-46X, 1304124, 30666821 and BV615K896AB. PFF19-1222 - PFF19-1222 fits early models, PFF19-1220 fits later models, please check image for compatibility. If fitting this to a diesel engined vehicle, an increase in noise and vibration is to be expected. This should be considered as a performance upgrade, not a standard replacement. PFF19-1225 - This part fits as an insert for the Front Upper Right Engine Mount.

The rubber on the original mounts degrades and soften with time resulting in excessive engine and gearbox movement. This insert is developed to fit in and around the voided sections of the original rubber mounts to restrict movement at higher torque levels. PFF19-1226 - This part fits as an insert for the Gearbox Mount.

To be sure of the correct fitment, please use the further specification data above to assist you. We also sell various other Powerflex bushes for this model. These may include items such as wishbone bushes, anti-roll bar bushes, steering rack bushes, suspension bumpstops, rear axle bushes etc. Bushes are one of the most highly stressed components fitted to a car. They undergo enormous strain, in the most arduous of conditions with no maintenance or lubrication.

Conventional rubber bushes deteriorate with age allowing movement of suspension components and geometry. Powerflex Bushes are made from a technologically advanced polyurethane plastic compound. This compound overcomes the common problem associated with harder bushes which is increased noise. By correct engineering the polyurethane compound bushes can be made 25-30% stiffer than rubber bushes, but with exactly the same noise absorption properties. Unlike old technology Poly bushes any increase in vibration / harshness felt through the vehicle is normally undetectable.

We Sell Powerflex Bushes For all makes and models of car. C&R sell an extensive range of replacement and High Performance parts for all makes and models of cars. Stocking only the Highest Quality brands such as: K&N, Black Diamond, Goodridge, Piper, Kent, Jetex, Superpro, Powerflex, Prothane, Vibra Technics, Redline, Eibach, Koni, Weitec and Scorpion. We're not just "box movers" we are able to offer in depth technical advise relating to the product or we can provide a fitting service on most of the VAG Group parts we sell in our Nottingham workshop. C & R Enterprises The Volkswagen, Audi, Seat and Skoda Specialists.

This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Steering & Suspension\Wheel Bearings, Hubs & Seals". The seller is "candrenterprises1" and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South Africa.
  • Brand: Powerflex Road
  • Manufacturer: For Ford
  • Model: Focus Mk2 ST (Early Models)
  • Manufacturer Part Number: 475C PFLEXK2364 749V
  • MPN: #N/A
  • Country of Manufacture: United Kingdom
  • Powerflex Range: Powerflex Road Series
  • Product Description: Powerflex Kit
  • Location on Vehicle: Car Bush Kit
  • Colour + Hardness (Shore): Various Colours + Hardness Ratings
  • Relevant Notes: See Main Description

For Ford Focus Mk2 ST Early Rr Uppr Control Arm Camber Bushes Powerflex Full Kit