Kit for Car

For Porsche Boxster 986 (1997-2004) FrEngine Mount Bush Powerflex Full Bush Kit

For Porsche Boxster 986 (1997-2004) FrEngine Mount Bush Powerflex Full Bush Kit

For Porsche Boxster 986 (1997-2004) FrEngine Mount Bush Powerflex Full Bush Kit
For help identifying the location of the bushes in this kit on your vehicle, please refer to the diagram below. Please Note: We haven't included Bump Stops or Exhaust Rubbers in this kit as many track focused cars already feature modified versions of these items.

This Kit contains the following items: Where there is an option (or) please tell us which one you would like us to send out with your kit. Diagram Ref 1 or : Front Anti Roll Bar Bushes 21.5mm.

PFF57-501-21.5 (Quantity 2) Diagram Ref 1 or : Front Anti Roll Bar Bushes 22.5mm. PFF57-501-22.5 (Quantity 2) Diagram Ref 1 or : Front Anti Roll Bar Bushes 23mm. PFF57-501-23 (Quantity 2) Diagram Ref 1 or : Front Anti Roll Bar Bushes 23.5mm.

PFF57-501-23.5 (Quantity 2) Diagram Ref 2: Front Track Control Arm Outer Bushes. PFF57-502 (Quantity 2) Diagram Ref 3: Front Track Control Arm Inner Bushes. PFF57-503 (Quantity 2) Diagram Ref 5: Rear Track Control Arm Outer Bushes. PFF57-502 (Quantity 2) Diagram Ref 6: Rear Track Control Arm Inner Bushes. PFF57-503 (Quantity 2) Diagram Ref 7: Rear Link Arm Inner Bushes. PFR57-507 (Quantity 2) Diagram Ref 10 or : Rear Anti Roll Bar Bushes 19mm. PFR57-510-19 (Quantity 2) Diagram Ref 10 or : Rear Anti Roll Bar Bushes 20mm. PFR57-510-20 (Quantity 2) Diagram Ref 10 or : Rear Anti Roll Bar Bushes 21mm. PFR57-510-21 (Quantity 2) Diagram Ref 20: Front Engine Mount Bush. The kit contains the following Fitment notes which are relevant to the items within it. PFF57-501-21.5 - Please check anti-roll bar diameter before ordering.

PFF57-501-22.5 - Please check anti-roll bar diameter before ordering. PFF57-501-23 - Please check anti-roll bar diameter before ordering. PFF57-501-23.5 - Please check anti-roll bar diameter before ordering.

PFF57-502 - Fits the front of all 996 and Boxster 986 models. It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-802. Fits the rear of 996, 997, 997 GT2, GT3 & GT3RS, Boxster 986, Boxster 987 and Cayman 987C. PFF57-503 - Fits the front of all 996 and Boxster 986 models.

It fits the front of the 997 GT2, GT3 & GT3RS models only, all other models of 997 models use PFF57-801. PFF57-503 - No adjustment, concentric. Fits the front of all 996 and Boxster 986 models. PFR57-520 - Our polyurethane bushes are ideal replacements for worn or damaged parts. Engine mount bushes are particularly prone to cracking of the rubber because of a large amount of voiding in the material to allow for excessive movement. For an insert only please use PFR57-521.

Hexagon profile allows for controlled engine movement and limits contact for reduced vibration. To be sure of the correct fitment, please use the further specification data above to assist you. We also sell various other Powerflex bushes for this model.

These may include items such as wishbone bushes, anti-roll bar bushes, steering rack bushes, suspension bumpstops, rear axle bushes etc. Bushes are one of the most highly stressed components fitted to a car. They undergo enormous strain, in the most arduous of conditions with no maintenance or lubrication. Conventional rubber bushes deteriorate with age allowing movement of suspension components and geometry. Powerflex Bushes are made from a technologically advanced polyurethane plastic compound. This compound overcomes the common problem associated with harder bushes which is increased noise. By correct engineering the polyurethane compound bushes can be made 25-30% stiffer than rubber bushes, but with exactly the same noise absorption properties.

Unlike old technology Poly bushes any increase in vibration / harshness felt through the vehicle is normally undetectable. We Sell Powerflex Bushes For all makes and models of car.

C&R sell an extensive range of replacement and High Performance parts for all makes and models of cars. Stocking only the Highest Quality brands such as: K&N, Black Diamond, Goodridge, Piper, Kent, Jetex, Superpro, Powerflex, Prothane, Vibra Technics, Redline, Eibach, Koni, Weitec and Scorpion. We're not just "box movers" we are able to offer in depth technical advise relating to the product or we can provide a fitting service on most of the VAG Group parts we sell in our Nottingham workshop. C & R Enterprises The Volkswagen, Audi, Seat and Skoda Specialists. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Steering & Suspension\Wheel Bearings, Hubs & Seals".

The seller is "candrenterprises1" and is located in this country: GB. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South Africa.
  • Brand: Powerflex Road
  • Manufacturer: For Porsche
  • Model: Boxster 986 (1997-2004)
  • Manufacturer Part Number: 1944 PFLEXK1359 RAR4
  • MPN: #N/A
  • Country of Manufacture: United Kingdom
  • Powerflex Range: Powerflex Road Series
  • Product Description: Powerflex Kit
  • Location on Vehicle: Car Bush Kit
  • Colour + Hardness (Shore): Various Colours + Hardness Ratings
  • Relevant Notes: See Main Description

For Porsche Boxster 986 (1997-2004) FrEngine Mount Bush Powerflex Full Bush Kit